Produse pentru benzi pentru motor gilera adn 50 2t (27)

Les bandes souples de Novaband et les tubes Novatube vous permettent de réaliser vos protections biologiques dans un délai maîtrisé. De par leur forme et leur souplesse, ils sont particulièrement adaptés pour recouvrir et radioprotéger, par exemple, certains composants d'enceintes blindées ou de tuyauterie.

Para el corte de sus bobinas, ofrecemos una gama completa de cuchillas circulares, cuchilla circular cóncava, contracuchilla y porta cuchillo equipado con abrazaderas de autobloqueo o de tornillo. También suministramos varios accesorios (rodamientos de bolas, ejes, anillos de corte, etc.).

iglidur® H2: Cost-effective high-temperature bearing up to 200°C Media resistant Low-Cost material. For application with high temperature requirements. Can be conditionally used in dry operation; excellent properties with additional lubrication. iglidur® H2 is available as cylindrical bearings and plain bearings with flange. Usable underwater Low-priced Chemical resistant For high temperatures

Qualitätsprüfungen: Technische Beschreibung Material: Silikon und Polyester temperature: -50°c to +180°C Beständig : UV, Wasser, Ozon,Sauerstoff Bei Temperaturen von mehr als +180°C empfehlen wir Ihnen die Materialausführung in Nomex. Auf Anfrage optional lieferbar. technical description material: silicone with polyester temperature: -50°c to +180°C resistant: UV, water, ozone, oxygen For temperatures higher than +180°C we recommend the material version in Nomex. On request optionally available. Blau (blue):251589-10b Druck (pressure):3,5 bar Lagen (layers):4 Schenkel (legs):152 mm Schwarz (black):25939-10 Wandstärke (wall thickness):5,5 mm Ø ID (Ø ID):76 mm

Keiper PU Flex timing belts are extruded of abrasion-resistant polyurethane and high-strength steel cords, aramid cords or high flexible steel cords and VA steel with endless winded cords. In these belts the cords are helically spooled. These timing belts can be used for all kinds of power transmission applications because of their high power transfer, and their high flexibility make them suitable for synchronous transport and positioning applications. By using standard polyurethane and such other belt materials as polyurethane that is cold resistant, heat resistant or suitable for contact with foodstuffs a wide spectrum of applications is possible.

Endliche Zahnriemen FDA für den Lebensmitteltransport. Speziell gefertigt für den Einsatz bei Verpackung und Transport von Lebensmitteln bevorratet IGAT ein umfangreiches Programm von Meterware aus FDA-Polyurethanen. Die PU Basismaterialien in blauer oder transparenter Farbe sind zugelassen für den direkten Kontakt mit Lebensmitteln, die Riemen werden teilungsabhängig mit und ohne Wickelnasen in seitlich versiegelten Konstruktionen geliefert.

The function of gaskets is to prevent the leakage of medium outside the equipment. Static seals are used in many applications such as plumbing and heating systems, sealing fasteners, containers and pipeline construction. They are washers, rings or frames which generally are adapted to the whole width of the sealing surface. They can be used for example in flange connections of pipelines, pumps, motors, valves, etc. The gaskets are made of various materials such as: Rubbers, fiber plates, synthetic plates, graphite, PTFE, etc.

Wir liefern Profildichtringe nach DIN 3869, EN ISO 11749/2 und 1179/2 aus NBR, FPM/FKM, EPDM, MVQ, FFKM und weiteren Sonderwerkstoffen. Eine umfangreiche Lagerhaltung gewährleistet kurze LIeferzeiten. Außer den handelsüblichen Standardabmessungen sind auf Anfrage weitere Sonderabmessungen erhältlich.

Seele und Decke aus hochwertigen Synthese-Kautschukmischungen, mit 2 geflochtenen Textileinlagen, Decke besonders abriebfest und witterungsbeständig Temperaturbeständigkeit von -40°C bis +100°C, kurzz. bis +125°C Zum Durchleiten von Hydrauliköl auf Mineralölbasis, Öl- und Wasseremulsionen sowie wässrigen Glykollösungen

Vor- und Rücklaufleitungen zum Öl- bzw. Wasserkühler & Leitungen mit Spezialschläuchen zur Schwingungs- und Geräuschdämpfung.

ENGINE INTAKE MANIFOLD TRANSPORTER T6 2.0 TDI

Clamp made out of a pre-rolled plate of stainless steel AISI 316. Design with welded AISI 316 studs and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of NBR rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized into rubber gasket. Diameter reach of double band repair clamp is max. 36 mm (depends on diameter pipe). Clamps available in different diameters: DN 250 up to DN 800. Clamps available in different lenghts: 300, 400, 500, 600 and 800 mm (other lengths on request). Indication pressure class for (waste)water: 10 bar for DN 250 up to DN 450, 6 bar for DN 500 up to DN 600, 4 bar for DN 650 and 3 bar from DN 700. Indication pressure class for gas:2 bar for DN 250 up to DN 450, 1, 5 bar for DN 500 up to DN 600, 1 bar for DN 650 and 0,8 bar from DN 700. Studs protected with plastic protection caps.

Naturkautschuk Gummiringe + Gummibänder

kaliteli ürün

For metal printing we are using special technology - Direct Metal Laser Sintering. DMLS is an additive process, when laser melts fine metal powder and builds up the product layer by layer. This method is perfect solution for direct, cost-efficient manufacturing of high-quality metal tool inserts, prototypes and end-use products. DMLS is used when strenght and funcionality of the product is very important. Technology allows tocreate products with extremely complex geometries including elements such as free-form surfaces, deep slots and coolant ducts. DMLS technology is widely used in healthcare, automotive and aviation industries. Choosing different materials produces products with different characteristics such as flexibility, rigidity and durability.

We supply rubber sealing O-ring comforming with GOST 9833-73 “Rubber sealing O-rings”. We produce: flat paronite and fluoroplastic gaskets in accordance with GOST 481-80 high-temperature TEG (thermally expanded graphite) gaskets according to STO 00220575.001-2007 heat-resistant spiral-wound gaskets according to GOST R 52376-2015

1103.S0/1104.36

Original numbers 924143882R, 6001547485, n100911db, 6001552014. For cars Logan Sandero I (US0B, US1Y) Lada Largus Nissan Almera Read

Tubi metallici estensibili per Acqua/Gas MF-FF ** / Tipo di tubo : Tubo Metallico a Collo Stretto ( Con trattamento termico) / Materiale del tubo : Acciaio Inossidabile AISI316L / Rivestimento : PVC Trasparente con fascia gialla – Senza rivestimento / Tipi di collegamento : Raccordo - Raccordo, Nipel - Raccordo *** Misure : 100-200 mm, 200-400 mm, 300-600 mm, 500-1000 mm, 750-1500 mm, 1000-2000 mm Campi di Applicazione: Per collegamenti di Fornelli / Per collegamenti di Caldaie / Per collegamenti di Scaldabagni / Per collegamenti di Stufe Nominal Diameter DN:DN15-DN20 Connection Type :MF (Male x Female), FF (Female x Female Extensible Length:10-20, 20-40, 30-60, 50-100, 75-150, 100-200 cm

OEM Spare Parts for Concrete Pumps

Les amortisseurs à cable AVC sont constitués de deux paires de barres, reliées entre elles par un câble à enroulement hélicoïdal (spire). Devis et commande en ligne 24/24 antivibratoires de qualité, particulièrement adaptés à l’emploi avec un système CVC, des pompes, des stations d’épuration et de dessalement, des tableaux de bord et dans les secteurs ferroviaire, naval et militaire.

Wir fertigen Schleifringe (roh oder fertigbearbeitet) aus Bronze, Messing, Kupferlegierungen, Sonderlegierungen

Wir liefern Rechteckring, Kantseal, R-Ringe, Vierkantringe aus NBR, FPM/FKM, EPDM und weiteren Sonderwerkstoffen, auf FDA oder EG 1935/2004 konform aus Vorrat. Eine Anfertigung ist teilweise kurzfristig möglich.

Neoprene endless molded timing belts (form belts)  MXL

Neoprene endless molded timing belts (form belts)  L / H / XH / XXH

BMW N47N N47S1

OEM Spare Parts for Concrete Pumps